Expert Plumbing Services in Mankato area, Minnesota

In the cold season, water can freeze within your pipes and cause them to break. A leaking pipe can cause flooding and significant water damage in your house if it’s not fixed immediately.

If you have found a burst pipe, the first step is to disable your home’s water reserve. You’ll complete this at the main water shutoff valve, which is usually found in your utility area or basement. Twisting the valve clockwise will disable the water.

Then reach out to us at 507-387-6596 right away. Regardless if it’s behind a wall, in your yard or under your house’s foundation, we’ll be able to locate the burst pipe and fix it quickly.

If you don’t use more water than typical and your payment doubles, there’s a good likelihood you have a water leak. Sometimes your payment will go up a little. It’s harder to catch but will normally become more obvious as the leak gets bigger.

It could be hard to find a water leak without expert assistance. Although you can check your water meter to find out if the leak is inside or outside your home.

A little bit of mildew is normal in humid rooms like bathrooms. But it’s not common to find big amounts accumulating on a non-shower wall, the ceiling or on baseboards, notably if these surfaces feel squishy to the touch.

A leaking pipe can cause walls, ceilings and floors to feel soft or droop. It can also leave water stains on surfaces.

These issues can occur in rooms with poor air circulation or high humidity. But it’s especially hard if you are experiencing other signs of a leaky pipe, like mold or musty smells.

Stagnant water can make a space smell stale. If the room also has moist walls or floors, you possibly have a water issue.

Your fixtures can back up sewer water and cause ruin when the water compression descends in your home. This can be caused by a broken backflow preventer, sewer line deterioration or other local issues. Reach out to us at 507-387-6596 at the first sign of backflow and we’ll get it fixed quickly.

A number of things can be the issue when your water pressure is insufficient. There could be a obstruction in your plumbing fixture. It may also be caused by a faulty water heater or a leaky pipe.

If you have a hot water unit with a tank, it has a defined capacity for hot water. If you’re experiencing cold water when you haven’t used a lot of heated water, something may be wrong. Your hot water tank could be dripping, nonfunctional or need to be updated.

An obstruction is probably to be the reason when your sink or shower drains too slowly. We’ll use a special instrument like a drain snake to break it up and get your fittings draining correctly again.

If your toilet’s tank seal fails, it will signal the tank to keep refilling. A toilet that keeps refilling can rapidly drive up your water dues.

Your water should be see-through.

Don’t worry if it comes out cloudy once in a while, as this generally just means there’s air in the water store. If you discover particles settling in your glass, you should have your water heater inspected.

Water that’s any other color can be hazardous to your health. Listed are a few issues that could cause your water to be discolored:

• Brown, red or yellow—This is often caused by a water main break in your community. It could also mean your pipes are worn down.
• Green or blue—This is particularly serious, as it means your pipes are probably corroded. Your water can taste brassy or bitter on account of a high density of copper or lead. Long-term intake has been linked to serious health problems in adults and children, such as intestinal illnesses, cancer and seizures.

If you’re observing discolored water or particles in your water, contact us at 507-387-6596 and we’ll identify the issue.

If your toilet’s tank seal gets damaged, it will signal the tank to continue refilling. A toilet that is always refilling can quickly drive up your water fees.